SXG Series Spin Flash Drier

Features
There are many kinds feding equipment for choosing,and feding is continue and static.
1. At the bottom of dryer,where is high temperature area,heat sensitivity raw material can not contact with heat surface directlu,therefore it solves the carbonized and changed color problems of heat sensitivity raw material.
2. There are air pressure equipment and shaft equipment,so canlonger life of machine.
3. There is special equipment for sharing wind,and raising the amount of amount of hot air.
4. There are rotational ?ow pieces inside the drying chamber.It is used to control the moisture and granle of raw material to needed level.
5. The density will be added in the machine.
6. Becausw gas speed at circle inside the drying chamber is high and the staying time of raw material is short,high efficiency and quick speed can be realized.It
is possible for small equipment to carry out large-scale production.

Descriptions
XSG series flash roating dryers’ techinology is based on advance techinology adorad.The machineis including many superioity,such as reasonable design,compactstuction,widly utilization,great productive capacity,good quality,high effect and save energy.Drying,grinding and sieve are completed in one euqipment in once time.It eliminate pollution and the techinology is reached advance level.

Principle
Hotairenters intostirr in gandcrushing and drying chamber from the bottom of dryer with suitable atomizing speed.It exerts strong shearing,blowing,floating and rotating effect to raw material.Therefore raw material is granulated through centrifuge,shearing,impacting and friction effect. It strengthens the process of geat exchange.At the bottom of dryer,the lage and damp granule is crushed under the action of stirer and  the granule that is small in partical and contain less moisture will lift accompainied with revolving air stream.During the periaod of lift,it is dried further.Because gas and solid two phase ?ow in rotating and the intertia of solid phase is more than that of gas and the relative velocity between solid and gas phase is large,so it strengthens the process of heat exchange.Therefore the machine has strong drying capacity.

Technical Parameters